Ganeti automatic instance allocation ==================================== Documents Ganeti version 2.1 .. contents:: Introduction ------------ Currently in Ganeti the admin has to specify the exact locations for an instance's node(s). This prevents a completely automatic node evacuation, and is in general a nuisance. The *iallocator* framework will enable automatic placement via external scripts, which allows customization of the cluster layout per the site's requirements. User-visible changes ~~~~~~~~~~~~~~~~~~~~ There are two parts of the ganeti operation that are impacted by the auto-allocation: how the cluster knows what the allocator algorithms are and how the admin uses these in creating instances. An allocation algorithm is just the filename of a program installed in a defined list of directories. Cluster configuration ~~~~~~~~~~~~~~~~~~~~~ At configure time, the list of the directories can be selected via the ``--with-iallocator-search-path=LIST`` option, where *LIST* is a comma-separated list of directories. If not given, this defaults to ``$libdir/ganeti/iallocators``, i.e. for an installation under ``/usr``, this will be ``/usr/lib/ganeti/iallocators``. Ganeti will then search for allocator script in the configured list, using the first one whose filename matches the one given by the user. Command line interface changes ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The node selection options in instanece add and instance replace disks can be replace by the new ``--iallocator=NAME`` option (shortened to ``-I``), which will cause the auto-assignement of nodes with the passed iallocator. The selected node(s) will be show as part of the command output. IAllocator API -------------- The protocol for communication between Ganeti and an allocator script will be the following: #. ganeti launches the program with a single argument, a filename that contains a JSON-encoded structure (the input message) #. if the script finishes with exit code different from zero, it is considered a general failure and the full output will be reported to the users; this can be the case when the allocator can't parse the input message #. if the allocator finishes with exit code zero, it is expected to output (on its stdout) a JSON-encoded structure (the response) Input message ~~~~~~~~~~~~~ The input message will be the JSON encoding of a dictionary containing the following: version the version of the protocol; this document specifies version 2 cluster_name the cluster name cluster_tags the list of cluster tags enabled_hypervisors the list of enabled hypervisors request a dictionary containing the request data: type the request type; this can be either ``allocate``, ``relocate`` or ``multi-evacuate``; the ``allocate`` request is used when a new instance needs to be placed on the cluster, while the ``relocate`` request is used when an existing instance needs to be moved within the cluster; the ``multi-evacuate`` protocol requests that the script computes the optimal relocate solution for all secondary instances of the given nodes The following keys are needed in allocate/relocate mode: name the name of the instance; if the request is a realocation, then this name will be found in the list of instances (see below), otherwise is the FQDN of the new instance required_nodes how many nodes should the algorithm return; while this information can be deduced from the instace's disk template, it's better if this computation is left to Ganeti as then allocator scripts are less sensitive to changes to the disk templates disk_space_total the total disk space that will be used by this instance on the (new) nodes; again, this information can be computed from the list of instance disks and its template type, but Ganeti is better suited to compute it If the request is an allocation, then there are extra fields in the request dictionary: disks list of dictionaries holding the disk definitions for this instance (in the order they are exported to the hypervisor): mode either ``r`` or ``w`` denoting if the disk is read-only or writable size the size of this disk in mebibytes nics a list of dictionaries holding the network interfaces for this instance, containing: ip the IP address that Ganeti know for this instance, or null mac the MAC address for this interface bridge the bridge to which this interface will be connected vcpus the number of VCPUs for the instance disk_template the disk template for the instance memory the memory size for the instance os the OS type for the instance tags the list of the instance's tags hypervisor the hypervisor of this instance If the request is of type relocate, then there is one more entry in the request dictionary, named ``relocate_from``, and it contains a list of nodes to move the instance away from; note that with Ganeti 2.0, this list will always contain a single node, the current secondary of the instance. The multi-evacuate mode has instead a single request argument: nodes the names of the nodes to be evacuated instances a dictionary with the data for the current existing instance on the cluster, indexed by instance name; the contents are similar to the instance definitions for the allocate mode, with the addition of: admin_up if this instance is set to run (but not the actual status of the instance) nodes list of nodes on which this instance is placed; the primary node of the instance is always the first one nodes dictionary with the data for the nodes in the cluster, indexed by the node name; the dict contains [*]_ : total_disk the total disk size of this node (mebibytes) free_disk the free disk space on the node total_memory the total memory size free_memory free memory on the node; note that currently this does not take into account the instances which are down on the node total_cpus the physical number of CPUs present on the machine; depending on the hypervisor, this might or might not be equal to how many CPUs the node operating system sees; primary_ip the primary IP address of the node secondary_ip the secondary IP address of the node (the one used for the DRBD replication); note that this can be the same as the primary one tags list with the tags of the node master_candidate: a boolean flag denoting whether this node is a master candidate drained: a boolean flag denoting whether this node is being drained offline: a boolean flag denoting whether this node is offline i_pri_memory: total memory required by primary instances i_pri_up_memory: total memory required by running primary instances No allocations should be made on nodes having either the ``drained`` or ``offline`` flags set. More details about these of node status flags is available in the manpage :manpage:`ganeti(7)`. .. [*] Note that no run-time data is present for offline or drained nodes; this means the tags total_memory, reserved_memory, free_memory, total_disk, free_disk, total_cpus, i_pri_memory and i_pri_up memory will be absent Response message ~~~~~~~~~~~~~~~~ The response message is much more simple than the input one. It is also a dict having three keys: success a boolean value denoting if the allocation was successful or not info a string with information from the scripts; if the allocation fails, this will be shown to the user result the output of the algorithm; even if the algorithm failed (i.e. success is false), this must be returned as an empty list for allocate/relocate, this is the list of node(s) for the instance; note that the length of this list must equal the ``requested_nodes`` entry in the input message, otherwise Ganeti will consider the result as failed for multi-evacuation mode, this is a list of lists; each element of the list is a list of instance name and the new secondary node .. note:: Current Ganeti version accepts either ``result`` or ``nodes`` as a backwards-compatibility measure (older versions only supported ``nodes``) Examples -------- Input messages to scripts ~~~~~~~~~~~~~~~~~~~~~~~~~ Input message, new instance allocation:: { "cluster_tags": [], "request": { "required_nodes": 2, "name": "instance3.example.com", "tags": [ "type:test", "owner:foo" ], "type": "allocate", "disks": [ { "mode": "w", "size": 1024 }, { "mode": "w", "size": 2048 } ], "nics": [ { "ip": null, "mac": "00:11:22:33:44:55", "bridge": null } ], "vcpus": 1, "disk_template": "drbd", "memory": 2048, "disk_space_total": 3328, "os": "etch-image" }, "cluster_name": "cluster1.example.com", "instances": { "instance1.example.com": { "tags": [], "should_run": false, "disks": [ { "mode": "w", "size": 64 }, { "mode": "w", "size": 512 } ], "nics": [ { "ip": null, "mac": "aa:00:00:00:60:bf", "bridge": "xen-br0" } ], "vcpus": 1, "disk_template": "plain", "memory": 128, "nodes": [ "nodee1.com" ], "os": "etch-image" }, "instance2.example.com": { "tags": [], "should_run": false, "disks": [ { "mode": "w", "size": 512 }, { "mode": "w", "size": 256 } ], "nics": [ { "ip": null, "mac": "aa:00:00:55:f8:38", "bridge": "xen-br0" } ], "vcpus": 1, "disk_template": "drbd", "memory": 512, "nodes": [ "node2.example.com", "node3.example.com" ], "os": "etch-image" } }, "version": 1, "nodes": { "node1.example.com": { "total_disk": 858276, "primary_ip": "192.168.1.1", "secondary_ip": "192.168.2.1", "tags": [], "free_memory": 3505, "free_disk": 856740, "total_memory": 4095 }, "node2.example.com": { "total_disk": 858240, "primary_ip": "192.168.1.3", "secondary_ip": "192.168.2.3", "tags": ["test"], "free_memory": 3505, "free_disk": 848320, "total_memory": 4095 }, "node3.example.com.com": { "total_disk": 572184, "primary_ip": "192.168.1.3", "secondary_ip": "192.168.2.3", "tags": [], "free_memory": 3505, "free_disk": 570648, "total_memory": 4095 } } } Input message, reallocation. Since only the request entry in the input message is changed, we show only this changed entry:: "request": { "relocate_from": [ "node3.example.com" ], "required_nodes": 1, "type": "relocate", "name": "instance2.example.com", "disk_space_total": 832 }, Input message, node evacuation:: "request": { "evac_nodes": [ "node2" ], "type": "multi-evacuate" }, Response messages ~~~~~~~~~~~~~~~~~ Successful response message:: { "info": "Allocation successful", "result": [ "node2.example.com", "node1.example.com" ], "success": true } Failed response message:: { "info": "Can't find a suitable node for position 2 (already selected: node2.example.com)", "result": [], "success": false } Successful node evacuation message:: { "info": "Request successful", "result": [ [ "instance1", "node3" ], [ "instance2", "node1" ] ], "success": true } Command line messages ~~~~~~~~~~~~~~~~~~~~~ :: # gnt-instance add -t plain -m 2g --os-size 1g --swap-size 512m --iallocator dumb-allocator -o etch-image instance3 Selected nodes for the instance: node1.example.com * creating instance disks... [...] # gnt-instance add -t plain -m 3400m --os-size 1g --swap-size 512m --iallocator dumb-allocator -o etch-image instance4 Failure: prerequisites not met for this operation: Can't compute nodes using iallocator 'dumb-allocator': Can't find a suitable node for position 1 (already selected: ) # gnt-instance add -t drbd -m 1400m --os-size 1g --swap-size 512m --iallocator dumb-allocator -o etch-image instance5 Failure: prerequisites not met for this operation: Can't compute nodes using iallocator 'dumb-allocator': Can't find a suitable node for position 2 (already selected: node1.example.com) .. vim: set textwidth=72 : .. Local Variables: .. mode: rst .. fill-column: 72 .. End: