{-# LANGUAGE TemplateHaskell, DeriveFunctor #-}

{-| Some common Ganeti types.

This holds types common to both core work, and to htools. Types that
are very core specific (e.g. configuration objects) should go in
'Ganeti.Objects', while types that are specific to htools in-memory
representation should go into 'Ganeti.HTools.Types'.

-}

{-

Copyright (C) 2012, 2013, 2014 Google Inc.
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-}

module Ganeti.Types
  ( AllocPolicy(..)
  , allocPolicyFromRaw
  , allocPolicyToRaw
  , InstanceStatus(..)
  , instanceStatusFromRaw
  , instanceStatusToRaw
  , DiskTemplate(..)
  , diskTemplateToRaw
  , diskTemplateFromRaw
  , diskTemplateMovable
  , TagKind(..)
  , tagKindToRaw
  , tagKindFromRaw
  , NonNegative
  , fromNonNegative
  , mkNonNegative
  , Positive
  , fromPositive
  , mkPositive
  , Negative
  , fromNegative
  , mkNegative
  , NonEmpty
  , fromNonEmpty
  , mkNonEmpty
  , NonEmptyString
  , QueryResultCode
  , IPv4Address
  , mkIPv4Address
  , IPv4Network
  , mkIPv4Network
  , IPv6Address
  , mkIPv6Address
  , IPv6Network
  , mkIPv6Network
  , MigrationMode(..)
  , migrationModeToRaw
  , VerifyOptionalChecks(..)
  , verifyOptionalChecksToRaw
  , DdmSimple(..)
  , DdmFull(..)
  , ddmFullToRaw
  , CVErrorCode(..)
  , cVErrorCodeToRaw
  , Hypervisor(..)
  , hypervisorFromRaw
  , hypervisorToRaw
  , OobCommand(..)
  , oobCommandToRaw
  , OobStatus(..)
  , oobStatusToRaw
  , StorageType(..)
  , storageTypeToRaw
  , EvacMode(..)
  , evacModeToRaw
  , FileDriver(..)
  , fileDriverToRaw
  , InstCreateMode(..)
  , instCreateModeToRaw
  , RebootType(..)
  , rebootTypeToRaw
  , ExportMode(..)
  , exportModeToRaw
  , IAllocatorTestDir(..)
  , iAllocatorTestDirToRaw
  , IAllocatorMode(..)
  , iAllocatorModeToRaw
  , NICMode(..)
  , nICModeToRaw
  , JobStatus(..)
  , jobStatusToRaw
  , jobStatusFromRaw
  , FinalizedJobStatus(..)
  , finalizedJobStatusToRaw
  , JobId
  , fromJobId
  , makeJobId
  , makeJobIdS
  , RelativeJobId
  , JobIdDep(..)
  , JobDependency(..)
  , absoluteJobDependency
  , getJobIdFromDependency
  , OpSubmitPriority(..)
  , opSubmitPriorityToRaw
  , parseSubmitPriority
  , fmtSubmitPriority
  , OpStatus(..)
  , opStatusToRaw
  , opStatusFromRaw
  , ELogType(..)
  , eLogTypeToRaw
  , ReasonElem
  , ReasonTrail
  , StorageUnit(..)
  , StorageUnitRaw(..)
  , StorageKey
  , addParamsToStorageUnit
  , diskTemplateToStorageType
  , VType(..)
  , vTypeFromRaw
  , vTypeToRaw
  , NodeRole(..)
  , nodeRoleToRaw
  , roleDescription
  , DiskMode(..)
  , diskModeToRaw
  , BlockDriver(..)
  , blockDriverToRaw
  , AdminState(..)
  , adminStateFromRaw
  , adminStateToRaw
  , AdminStateSource(..)
  , adminStateSourceFromRaw
  , adminStateSourceToRaw
  , StorageField(..)
  , storageFieldToRaw
  , DiskAccessMode(..)
  , diskAccessModeToRaw
  , LocalDiskStatus(..)
  , localDiskStatusFromRaw
  , localDiskStatusToRaw
  , localDiskStatusName
  , ReplaceDisksMode(..)
  , replaceDisksModeToRaw
  , RpcTimeout(..)
  , rpcTimeoutFromRaw -- FIXME: no used anywhere
  , rpcTimeoutToRaw
  , HotplugTarget(..)
  , hotplugTargetToRaw
  , HotplugAction(..)
  , hotplugActionToRaw
  , SshKeyType(..)
  , sshKeyTypeToRaw
  , Private(..)
  , showPrivateJSObject
  , Secret(..)
  , showSecretJSObject
  , revealValInJSObject
  , redacted
  , HvParams
  , OsParams
  , OsParamsPrivate
  , TimeStampObject(..)
  , UuidObject(..)
  , ForthcomingObject(..)
  , SerialNoObject(..)
  , TagsObject(..)
  ) where

import Control.Applicative
import Control.Monad (liftM)
import qualified Text.JSON as JSON
import Text.JSON (JSON, readJSON, showJSON)
import Data.Ratio (numerator, denominator)
import qualified Data.Set as Set
import System.Time (ClockTime)

import qualified Ganeti.ConstantUtils as ConstantUtils
import Ganeti.JSON
import qualified Ganeti.THH as THH
import Ganeti.Utils

-- * Generic types

-- | Type that holds a non-negative value.
newtype NonNegative a = NonNegative { fromNonNegative :: a }
  deriving (Show, Eq, Ord)

-- | Smart constructor for 'NonNegative'.
mkNonNegative :: (Monad m, Num a, Ord a, Show a) => a -> m (NonNegative a)
mkNonNegative i | i >= 0 = return (NonNegative i)
                | otherwise = fail $ "Invalid value for non-negative type '" ++
                              show i ++ "'"

instance (JSON.JSON a, Num a, Ord a, Show a) => JSON.JSON (NonNegative a) where
  showJSON = JSON.showJSON . fromNonNegative
  readJSON v = JSON.readJSON v >>= mkNonNegative

-- | Type that holds a positive value.
newtype Positive a = Positive { fromPositive :: a }
  deriving (Show, Eq, Ord)

-- | Smart constructor for 'Positive'.
mkPositive :: (Monad m, Num a, Ord a, Show a) => a -> m (Positive a)
mkPositive i | i > 0 = return (Positive i)
             | otherwise = fail $ "Invalid value for positive type '" ++
                           show i ++ "'"

instance (JSON.JSON a, Num a, Ord a, Show a) => JSON.JSON (Positive a) where
  showJSON = JSON.showJSON . fromPositive
  readJSON v = JSON.readJSON v >>= mkPositive

-- | Type that holds a negative value.
newtype Negative a = Negative { fromNegative :: a }
  deriving (Show, Eq, Ord)

-- | Smart constructor for 'Negative'.
mkNegative :: (Monad m, Num a, Ord a, Show a) => a -> m (Negative a)
mkNegative i | i < 0 = return (Negative i)
             | otherwise = fail $ "Invalid value for negative type '" ++
                           show i ++ "'"

instance (JSON.JSON a, Num a, Ord a, Show a) => JSON.JSON (Negative a) where
  showJSON = JSON.showJSON . fromNegative
  readJSON v = JSON.readJSON v >>= mkNegative

-- | Type that holds a non-null list.
newtype NonEmpty a = NonEmpty { fromNonEmpty :: [a] }
  deriving (Show, Eq, Ord)

-- | Smart constructor for 'NonEmpty'.
mkNonEmpty :: (Monad m) => [a] -> m (NonEmpty a)
mkNonEmpty [] = fail "Received empty value for non-empty list"
mkNonEmpty xs = return (NonEmpty xs)

instance (JSON.JSON a) => JSON.JSON (NonEmpty a) where
  showJSON = JSON.showJSON . fromNonEmpty
  readJSON v = JSON.readJSON v >>= mkNonEmpty

-- | A simple type alias for non-empty strings.
type NonEmptyString = NonEmpty Char

type QueryResultCode = Int

newtype IPv4Address = IPv4Address { fromIPv4Address :: String }
  deriving (Show, Eq, Ord)

-- FIXME: this should check that 'address' is a valid ip
mkIPv4Address :: Monad m => String -> m IPv4Address
mkIPv4Address address =
  return IPv4Address { fromIPv4Address = address }

instance JSON.JSON IPv4Address where
  showJSON = JSON.showJSON . fromIPv4Address
  readJSON v = JSON.readJSON v >>= mkIPv4Address

newtype IPv4Network = IPv4Network { fromIPv4Network :: String }
  deriving (Show, Eq, Ord)

-- FIXME: this should check that 'address' is a valid ip
mkIPv4Network :: Monad m => String -> m IPv4Network
mkIPv4Network address =
  return IPv4Network { fromIPv4Network = address }

instance JSON.JSON IPv4Network where
  showJSON = JSON.showJSON . fromIPv4Network
  readJSON v = JSON.readJSON v >>= mkIPv4Network

newtype IPv6Address = IPv6Address { fromIPv6Address :: String }
  deriving (Show, Eq, Ord)

-- FIXME: this should check that 'address' is a valid ip
mkIPv6Address :: Monad m => String -> m IPv6Address
mkIPv6Address address =
  return IPv6Address { fromIPv6Address = address }

instance JSON.JSON IPv6Address where
  showJSON = JSON.showJSON . fromIPv6Address
  readJSON v = JSON.readJSON v >>= mkIPv6Address

newtype IPv6Network = IPv6Network { fromIPv6Network :: String }
  deriving (Show, Eq, Ord)

-- FIXME: this should check that 'address' is a valid ip
mkIPv6Network :: Monad m => String -> m IPv6Network
mkIPv6Network address =
  return IPv6Network { fromIPv6Network = address }

instance JSON.JSON IPv6Network where
  showJSON = JSON.showJSON . fromIPv6Network
  readJSON v = JSON.readJSON v >>= mkIPv6Network

-- * Ganeti types

-- | Instance disk template type. The disk template is a name for the
-- constructor of the disk configuration 'DiskLogicalId' used for
-- serialization, configuration values, etc.
$(THH.declareLADT ''String "DiskTemplate"
       [ ("DTDiskless",   "diskless")
       , ("DTFile",       "file")
       , ("DTSharedFile", "sharedfile")
       , ("DTPlain",      "plain")
       , ("DTBlock",      "blockdev")
       , ("DTDrbd8",      "drbd")
       , ("DTRbd",        "rbd")
       , ("DTExt",        "ext")
       , ("DTGluster",    "gluster")
       ])
$(THH.makeJSONInstance ''DiskTemplate)

instance THH.PyValue DiskTemplate where
  showValue = show . diskTemplateToRaw

instance HasStringRepr DiskTemplate where
  fromStringRepr = diskTemplateFromRaw
  toStringRepr = diskTemplateToRaw

-- | Predicate on disk templates indicating if instances based on this
-- disk template can freely be moved (to any node in the node group).
diskTemplateMovable :: DiskTemplate -> Bool
-- Note: we deliberately do not use wildcard pattern to force an
-- update of this function whenever a new disk template is added.
diskTemplateMovable DTDiskless    = True
diskTemplateMovable DTFile        = False
diskTemplateMovable DTSharedFile  = True
diskTemplateMovable DTPlain       = False
diskTemplateMovable DTBlock       = False
diskTemplateMovable DTDrbd8       = False
diskTemplateMovable DTRbd         = True
diskTemplateMovable DTExt         = True
diskTemplateMovable DTGluster     = True

-- | Data type representing what items the tag operations apply to.
$(THH.declareLADT ''String "TagKind"
  [ ("TagKindInstance", "instance")
  , ("TagKindNode",     "node")
  , ("TagKindGroup",    "nodegroup")
  , ("TagKindCluster",  "cluster")
  , ("TagKindNetwork",  "network")
  ])
$(THH.makeJSONInstance ''TagKind)

-- | The Group allocation policy type.
--
-- Note that the order of constructors is important as the automatic
-- Ord instance will order them in the order they are defined, so when
-- changing this data type be careful about the interaction with the
-- desired sorting order.
$(THH.declareLADT ''String "AllocPolicy"
       [ ("AllocPreferred",   "preferred")
       , ("AllocLastResort",  "last_resort")
       , ("AllocUnallocable", "unallocable")
       ])
$(THH.makeJSONInstance ''AllocPolicy)

-- | The Instance real state type.
$(THH.declareLADT ''String "InstanceStatus"
       [ ("StatusDown",    "ADMIN_down")
       , ("StatusOffline", "ADMIN_offline")
       , ("ErrorDown",     "ERROR_down")
       , ("ErrorUp",       "ERROR_up")
       , ("NodeDown",      "ERROR_nodedown")
       , ("NodeOffline",   "ERROR_nodeoffline")
       , ("Running",       "running")
       , ("UserDown",      "USER_down")
       , ("WrongNode",     "ERROR_wrongnode")
       ])
$(THH.makeJSONInstance ''InstanceStatus)

-- | Migration mode.
$(THH.declareLADT ''String "MigrationMode"
     [ ("MigrationLive",    "live")
     , ("MigrationNonLive", "non-live")
     ])
$(THH.makeJSONInstance ''MigrationMode)

-- | Verify optional checks.
$(THH.declareLADT ''String "VerifyOptionalChecks"
     [ ("VerifyNPlusOneMem", "nplusone_mem")
     ])
$(THH.makeJSONInstance ''VerifyOptionalChecks)

-- | Cluster verify error codes.
$(THH.declareLADT ''String "CVErrorCode"
  [ ("CvECLUSTERCFG",                  "ECLUSTERCFG")
  , ("CvECLUSTERCERT",                 "ECLUSTERCERT")
  , ("CvECLUSTERCLIENTCERT",           "ECLUSTERCLIENTCERT")
  , ("CvECLUSTERFILECHECK",            "ECLUSTERFILECHECK")
  , ("CvECLUSTERDANGLINGNODES",        "ECLUSTERDANGLINGNODES")
  , ("CvECLUSTERDANGLINGINST",         "ECLUSTERDANGLINGINST")
  , ("CvEINSTANCEBADNODE",             "EINSTANCEBADNODE")
  , ("CvEINSTANCEDOWN",                "EINSTANCEDOWN")
  , ("CvEINSTANCELAYOUT",              "EINSTANCELAYOUT")
  , ("CvEINSTANCEMISSINGDISK",         "EINSTANCEMISSINGDISK")
  , ("CvEINSTANCEFAULTYDISK",          "EINSTANCEFAULTYDISK")
  , ("CvEINSTANCEWRONGNODE",           "EINSTANCEWRONGNODE")
  , ("CvEINSTANCESPLITGROUPS",         "EINSTANCESPLITGROUPS")
  , ("CvEINSTANCEPOLICY",              "EINSTANCEPOLICY")
  , ("CvEINSTANCEUNSUITABLENODE",      "EINSTANCEUNSUITABLENODE")
  , ("CvEINSTANCEMISSINGCFGPARAMETER", "EINSTANCEMISSINGCFGPARAMETER")
  , ("CvENODEDRBD",                    "ENODEDRBD")
  , ("CvENODEDRBDVERSION",             "ENODEDRBDVERSION")
  , ("CvENODEDRBDHELPER",              "ENODEDRBDHELPER")
  , ("CvENODEFILECHECK",               "ENODEFILECHECK")
  , ("CvENODEHOOKS",                   "ENODEHOOKS")
  , ("CvENODEHV",                      "ENODEHV")
  , ("CvENODELVM",                     "ENODELVM")
  , ("CvENODEN1",                      "ENODEN1")
  , ("CvENODENET",                     "ENODENET")
  , ("CvENODEOS",                      "ENODEOS")
  , ("CvENODEORPHANINSTANCE",          "ENODEORPHANINSTANCE")
  , ("CvENODEORPHANLV",                "ENODEORPHANLV")
  , ("CvENODERPC",                     "ENODERPC")
  , ("CvENODESSH",                     "ENODESSH")
  , ("CvENODEVERSION",                 "ENODEVERSION")
  , ("CvENODESETUP",                   "ENODESETUP")
  , ("CvENODETIME",                    "ENODETIME")
  , ("CvENODEOOBPATH",                 "ENODEOOBPATH")
  , ("CvENODEUSERSCRIPTS",             "ENODEUSERSCRIPTS")
  , ("CvENODEFILESTORAGEPATHS",        "ENODEFILESTORAGEPATHS")
  , ("CvENODEFILESTORAGEPATHUNUSABLE", "ENODEFILESTORAGEPATHUNUSABLE")
  , ("CvENODESHAREDFILESTORAGEPATHUNUSABLE",
     "ENODESHAREDFILESTORAGEPATHUNUSABLE")
  , ("CvENODEGLUSTERSTORAGEPATHUNUSABLE",
     "ENODEGLUSTERSTORAGEPATHUNUSABLE")
  , ("CvEGROUPDIFFERENTPVSIZE",        "EGROUPDIFFERENTPVSIZE")
  , ("CvEEXTAGS",                      "EEXTAGS")
  ])
$(THH.makeJSONInstance ''CVErrorCode)

-- | Dynamic device modification, just add/remove version.
$(THH.declareLADT ''String "DdmSimple"
     [ ("DdmSimpleAdd",    "add")
     , ("DdmSimpleAttach", "attach")
     , ("DdmSimpleRemove", "remove")
     , ("DdmSimpleDetach", "detach")
     ])
$(THH.makeJSONInstance ''DdmSimple)

-- | Dynamic device modification, all operations version.
--
-- TODO: DDM_SWAP, DDM_MOVE?
$(THH.declareLADT ''String "DdmFull"
     [ ("DdmFullAdd",    "add")
     , ("DdmFullAttach", "attach")
     , ("DdmFullRemove", "remove")
     , ("DdmFullDetach", "detach")
     , ("DdmFullModify", "modify")
     ])
$(THH.makeJSONInstance ''DdmFull)

-- | Hypervisor type definitions.
$(THH.declareLADT ''String "Hypervisor"
  [ ("Kvm",    "kvm")
  , ("XenPvm", "xen-pvm")
  , ("Chroot", "chroot")
  , ("XenHvm", "xen-hvm")
  , ("Lxc",    "lxc")
  , ("Fake",   "fake")
  ])
$(THH.makeJSONInstance ''Hypervisor)

instance THH.PyValue Hypervisor where
  showValue = show . hypervisorToRaw

instance HasStringRepr Hypervisor where
  fromStringRepr = hypervisorFromRaw
  toStringRepr = hypervisorToRaw

-- | Oob command type.
$(THH.declareLADT ''String "OobCommand"
  [ ("OobHealth",      "health")
  , ("OobPowerCycle",  "power-cycle")
  , ("OobPowerOff",    "power-off")
  , ("OobPowerOn",     "power-on")
  , ("OobPowerStatus", "power-status")
  ])
$(THH.makeJSONInstance ''OobCommand)

-- | Oob command status
$(THH.declareLADT ''String "OobStatus"
  [ ("OobStatusCritical", "CRITICAL")
  , ("OobStatusOk",       "OK")
  , ("OobStatusUnknown",  "UNKNOWN")
  , ("OobStatusWarning",  "WARNING")
  ])
$(THH.makeJSONInstance ''OobStatus)

-- | Storage type.
$(THH.declareLADT ''String "StorageType"
  [ ("StorageFile", "file")
  , ("StorageSharedFile", "sharedfile")
  , ("StorageGluster", "gluster")
  , ("StorageLvmPv", "lvm-pv")
  , ("StorageLvmVg", "lvm-vg")
  , ("StorageDiskless", "diskless")
  , ("StorageBlock", "blockdev")
  , ("StorageRados", "rados")
  , ("StorageExt", "ext")
  ])
$(THH.makeJSONInstance ''StorageType)

-- | Storage keys are identifiers for storage units. Their content varies
-- depending on the storage type, for example a storage key for LVM storage
-- is the volume group name.
type StorageKey = String

-- | Storage parameters
type SPExclusiveStorage = Bool

-- | Storage units without storage-type-specific parameters
data StorageUnitRaw = SURaw StorageType StorageKey

-- | Full storage unit with storage-type-specific parameters
data StorageUnit = SUFile StorageKey
                 | SUSharedFile StorageKey
                 | SUGluster StorageKey
                 | SULvmPv StorageKey SPExclusiveStorage
                 | SULvmVg StorageKey SPExclusiveStorage
                 | SUDiskless StorageKey
                 | SUBlock StorageKey
                 | SURados StorageKey
                 | SUExt StorageKey
                 deriving (Eq)

instance Show StorageUnit where
  show (SUFile key) = showSUSimple StorageFile key
  show (SUSharedFile key) = showSUSimple StorageSharedFile key
  show (SUGluster key) = showSUSimple StorageGluster key
  show (SULvmPv key es) = showSULvm StorageLvmPv key es
  show (SULvmVg key es) = showSULvm StorageLvmVg key es
  show (SUDiskless key) = showSUSimple StorageDiskless key
  show (SUBlock key) = showSUSimple StorageBlock key
  show (SURados key) = showSUSimple StorageRados key
  show (SUExt key) = showSUSimple StorageExt key

instance JSON StorageUnit where
  showJSON (SUFile key) = showJSON (StorageFile, key, []::[String])
  showJSON (SUSharedFile key) = showJSON (StorageSharedFile, key, []::[String])
  showJSON (SUGluster key) = showJSON (StorageGluster, key, []::[String])
  showJSON (SULvmPv key es) = showJSON (StorageLvmPv, key, [es])
  showJSON (SULvmVg key es) = showJSON (StorageLvmVg, key, [es])
  showJSON (SUDiskless key) = showJSON (StorageDiskless, key, []::[String])
  showJSON (SUBlock key) = showJSON (StorageBlock, key, []::[String])
  showJSON (SURados key) = showJSON (StorageRados, key, []::[String])
  showJSON (SUExt key) = showJSON (StorageExt, key, []::[String])
-- FIXME: add readJSON implementation
  readJSON = fail "Not implemented"

-- | Composes a string representation of storage types without
-- storage parameters
showSUSimple :: StorageType -> StorageKey -> String
showSUSimple st sk = show (storageTypeToRaw st, sk, []::[String])

-- | Composes a string representation of the LVM storage types
showSULvm :: StorageType -> StorageKey -> SPExclusiveStorage -> String
showSULvm st sk es = show (storageTypeToRaw st, sk, [es])

-- | Mapping from disk templates to storage types.
diskTemplateToStorageType :: DiskTemplate -> StorageType
diskTemplateToStorageType DTExt = StorageExt
diskTemplateToStorageType DTFile = StorageFile
diskTemplateToStorageType DTSharedFile = StorageSharedFile
diskTemplateToStorageType DTDrbd8 = StorageLvmVg
diskTemplateToStorageType DTPlain = StorageLvmVg
diskTemplateToStorageType DTRbd = StorageRados
diskTemplateToStorageType DTDiskless = StorageDiskless
diskTemplateToStorageType DTBlock = StorageBlock
diskTemplateToStorageType DTGluster = StorageGluster

-- | Equips a raw storage unit with its parameters
addParamsToStorageUnit :: SPExclusiveStorage -> StorageUnitRaw -> StorageUnit
addParamsToStorageUnit _ (SURaw StorageBlock key) = SUBlock key
addParamsToStorageUnit _ (SURaw StorageDiskless key) = SUDiskless key
addParamsToStorageUnit _ (SURaw StorageExt key) = SUExt key
addParamsToStorageUnit _ (SURaw StorageFile key) = SUFile key
addParamsToStorageUnit _ (SURaw StorageSharedFile key) = SUSharedFile key
addParamsToStorageUnit _ (SURaw StorageGluster key) = SUGluster key
addParamsToStorageUnit es (SURaw StorageLvmPv key) = SULvmPv key es
addParamsToStorageUnit es (SURaw StorageLvmVg key) = SULvmVg key es
addParamsToStorageUnit _ (SURaw StorageRados key) = SURados key

-- | Node evac modes.
--
-- This is part of the 'IAllocator' interface and it is used, for
-- example, in 'Ganeti.HTools.Loader.RqType'.  However, it must reside
-- in this module, and not in 'Ganeti.HTools.Types', because it is
-- also used by 'Ganeti.Constants'.
$(THH.declareLADT ''String "EvacMode"
  [ ("ChangePrimary",   "primary-only")
  , ("ChangeSecondary", "secondary-only")
  , ("ChangeAll",       "all")
  ])
$(THH.makeJSONInstance ''EvacMode)

-- | The file driver type.
$(THH.declareLADT ''String "FileDriver"
  [ ("FileLoop",   "loop")
  , ("FileBlktap", "blktap")
  , ("FileBlktap2", "blktap2")
  ])
$(THH.makeJSONInstance ''FileDriver)

-- | The instance create mode.
$(THH.declareLADT ''String "InstCreateMode"
  [ ("InstCreate",       "create")
  , ("InstImport",       "import")
  , ("InstRemoteImport", "remote-import")
  ])
$(THH.makeJSONInstance ''InstCreateMode)

-- | Reboot type.
$(THH.declareLADT ''String "RebootType"
  [ ("RebootSoft", "soft")
  , ("RebootHard", "hard")
  , ("RebootFull", "full")
  ])
$(THH.makeJSONInstance ''RebootType)

-- | Export modes.
$(THH.declareLADT ''String "ExportMode"
  [ ("ExportModeLocal",  "local")
  , ("ExportModeRemote", "remote")
  ])
$(THH.makeJSONInstance ''ExportMode)

-- | IAllocator run types (OpTestIAllocator).
$(THH.declareLADT ''String "IAllocatorTestDir"
  [ ("IAllocatorDirIn",  "in")
  , ("IAllocatorDirOut", "out")
  ])
$(THH.makeJSONInstance ''IAllocatorTestDir)

-- | IAllocator mode. FIXME: use this in "HTools.Backend.IAlloc".
$(THH.declareLADT ''String "IAllocatorMode"
  [ ("IAllocatorAlloc",       "allocate")
  , ("IAllocatorAllocateSecondary", "allocate-secondary")
  , ("IAllocatorMultiAlloc",  "multi-allocate")
  , ("IAllocatorReloc",       "relocate")
  , ("IAllocatorNodeEvac",    "node-evacuate")
  , ("IAllocatorChangeGroup", "change-group")
  ])
$(THH.makeJSONInstance ''IAllocatorMode)

-- | Network mode.
$(THH.declareLADT ''String "NICMode"
  [ ("NMBridged", "bridged")
  , ("NMRouted",  "routed")
  , ("NMOvs",     "openvswitch")
  , ("NMPool",    "pool")
  ])
$(THH.makeJSONInstance ''NICMode)

-- | The JobStatus data type. Note that this is ordered especially
-- such that greater\/lesser comparison on values of this type makes
-- sense.
$(THH.declareLADT ''String "JobStatus"
  [ ("JOB_STATUS_QUEUED",    "queued")
  , ("JOB_STATUS_WAITING",   "waiting")
  , ("JOB_STATUS_CANCELING", "canceling")
  , ("JOB_STATUS_RUNNING",   "running")
  , ("JOB_STATUS_CANCELED",  "canceled")
  , ("JOB_STATUS_SUCCESS",   "success")
  , ("JOB_STATUS_ERROR",     "error")
  ])
$(THH.makeJSONInstance ''JobStatus)

-- | Finalized job status.
$(THH.declareLADT ''String "FinalizedJobStatus"
  [ ("JobStatusCanceled",   "canceled")
  , ("JobStatusSuccessful", "success")
  , ("JobStatusFailed",     "error")
  ])
$(THH.makeJSONInstance ''FinalizedJobStatus)

-- | The Ganeti job type.
newtype JobId = JobId { fromJobId :: Int }
  deriving (Show, Eq, Ord)

-- | Builds a job ID.
makeJobId :: (Monad m) => Int -> m JobId
makeJobId i | i >= 0 = return $ JobId i
            | otherwise = fail $ "Invalid value for job ID ' " ++ show i ++ "'"

-- | Builds a job ID from a string.
makeJobIdS :: (Monad m) => String -> m JobId
makeJobIdS s = tryRead "parsing job id" s >>= makeJobId

-- | Parses a job ID.
parseJobId :: (Monad m) => JSON.JSValue -> m JobId
parseJobId (JSON.JSString x) = makeJobIdS $ JSON.fromJSString x
parseJobId (JSON.JSRational _ x) =
  if denominator x /= 1
    then fail $ "Got fractional job ID from master daemon?! Value:" ++ show x
    -- FIXME: potential integer overflow here on 32-bit platforms
    else makeJobId . fromIntegral . numerator $ x
parseJobId x = fail $ "Wrong type/value for job id: " ++ show x

instance JSON.JSON JobId where
  showJSON = JSON.showJSON . fromJobId
  readJSON = parseJobId

-- | Relative job ID type alias.
type RelativeJobId = Negative Int

-- | Job ID dependency.
data JobIdDep = JobDepRelative RelativeJobId
              | JobDepAbsolute JobId
                deriving (Show, Eq, Ord)

instance JSON.JSON JobIdDep where
  showJSON (JobDepRelative i) = showJSON i
  showJSON (JobDepAbsolute i) = showJSON i
  readJSON v =
    case JSON.readJSON v::JSON.Result (Negative Int) of
      -- first try relative dependency, usually most common
      JSON.Ok r -> return $ JobDepRelative r
      JSON.Error _ -> liftM JobDepAbsolute (parseJobId v)

-- | From job ID dependency and job ID, compute the absolute dependency.
absoluteJobIdDep :: (Monad m) => JobIdDep -> JobId -> m JobIdDep
absoluteJobIdDep (JobDepAbsolute jid) _ = return $ JobDepAbsolute jid
absoluteJobIdDep (JobDepRelative rjid) jid =
  liftM JobDepAbsolute . makeJobId $ fromJobId jid + fromNegative rjid

-- | Job Dependency type.
data JobDependency = JobDependency JobIdDep [FinalizedJobStatus]
                     deriving (Show, Eq, Ord)

instance JSON JobDependency where
  showJSON (JobDependency dep status) = showJSON (dep, status)
  readJSON = liftM (uncurry JobDependency) . readJSON

-- | From job dependency and job id compute an absolute job dependency.
absoluteJobDependency :: (Monad m) => JobDependency -> JobId -> m JobDependency
absoluteJobDependency (JobDependency jdep fstats) jid =
  liftM (flip JobDependency fstats) $ absoluteJobIdDep jdep jid

-- | From a job dependency get the absolute job id it depends on,
-- if given absolutely.
getJobIdFromDependency :: JobDependency -> [JobId]
getJobIdFromDependency (JobDependency (JobDepAbsolute jid) _) = [jid]
getJobIdFromDependency _ = []

-- | Valid opcode priorities for submit.
$(THH.declareIADT "OpSubmitPriority"
  [ ("OpPrioLow",    'ConstantUtils.priorityLow)
  , ("OpPrioNormal", 'ConstantUtils.priorityNormal)
  , ("OpPrioHigh",   'ConstantUtils.priorityHigh)
  ])
$(THH.makeJSONInstance ''OpSubmitPriority)

-- | Parse submit priorities from a string.
parseSubmitPriority :: (Monad m) => String -> m OpSubmitPriority
parseSubmitPriority "low"    = return OpPrioLow
parseSubmitPriority "normal" = return OpPrioNormal
parseSubmitPriority "high"   = return OpPrioHigh
parseSubmitPriority str      = fail $ "Unknown priority '" ++ str ++ "'"

-- | Format a submit priority as string.
fmtSubmitPriority :: OpSubmitPriority -> String
fmtSubmitPriority OpPrioLow    = "low"
fmtSubmitPriority OpPrioNormal = "normal"
fmtSubmitPriority OpPrioHigh   = "high"

-- | Our ADT for the OpCode status at runtime (while in a job).
$(THH.declareLADT ''String "OpStatus"
  [ ("OP_STATUS_QUEUED",    "queued")
  , ("OP_STATUS_WAITING",   "waiting")
  , ("OP_STATUS_CANCELING", "canceling")
  , ("OP_STATUS_RUNNING",   "running")
  , ("OP_STATUS_CANCELED",  "canceled")
  , ("OP_STATUS_SUCCESS",   "success")
  , ("OP_STATUS_ERROR",     "error")
  ])
$(THH.makeJSONInstance ''OpStatus)

-- | Type for the job message type.
$(THH.declareLADT ''String "ELogType"
  [ ("ELogMessage",      "message")
  , ("ELogRemoteImport", "remote-import")
  , ("ELogJqueueTest",   "jqueue-test")
  , ("ELogDelayTest",    "delay-test")
  ])
$(THH.makeJSONInstance ''ELogType)

-- | Type of one element of a reason trail, of form
-- @(source, reason, timestamp)@.
type ReasonElem = (String, String, Integer)

-- | Type representing a reason trail.
type ReasonTrail = [ReasonElem]

-- | The VTYPES, a mini-type system in Python.
$(THH.declareLADT ''String "VType"
  [ ("VTypeString",      "string")
  , ("VTypeMaybeString", "maybe-string")
  , ("VTypeBool",        "bool")
  , ("VTypeSize",        "size")
  , ("VTypeInt",         "int")
  , ("VTypeFloat",       "float")
  ])
$(THH.makeJSONInstance ''VType)

instance THH.PyValue VType where
  showValue = THH.showValue . vTypeToRaw

-- * Node role type

$(THH.declareLADT ''String "NodeRole"
  [ ("NROffline",   "O")
  , ("NRDrained",   "D")
  , ("NRRegular",   "R")
  , ("NRCandidate", "C")
  , ("NRMaster",    "M")
  ])
$(THH.makeJSONInstance ''NodeRole)

-- | The description of the node role.
roleDescription :: NodeRole -> String
roleDescription NROffline   = "offline"
roleDescription NRDrained   = "drained"
roleDescription NRRegular   = "regular"
roleDescription NRCandidate = "master candidate"
roleDescription NRMaster    = "master"

-- * Disk types

$(THH.declareLADT ''String "DiskMode"
  [ ("DiskRdOnly", "ro")
  , ("DiskRdWr",   "rw")
  ])
$(THH.makeJSONInstance ''DiskMode)

-- | The persistent block driver type. Currently only one type is allowed.
$(THH.declareLADT ''String "BlockDriver"
  [ ("BlockDrvManual", "manual")
  ])
$(THH.makeJSONInstance ''BlockDriver)

-- * Instance types

$(THH.declareLADT ''String "AdminState"
  [ ("AdminOffline", "offline")
  , ("AdminDown",    "down")
  , ("AdminUp",      "up")
  ])
$(THH.makeJSONInstance ''AdminState)

$(THH.declareLADT ''String "AdminStateSource"
  [ ("AdminSource", "admin")
  , ("UserSource",  "user")
  ])
$(THH.makeJSONInstance ''AdminStateSource)

instance THH.PyValue AdminStateSource where
  showValue = THH.showValue . adminStateSourceToRaw

-- * Storage field type

$(THH.declareLADT ''String "StorageField"
  [ ( "SFUsed",        "used")
  , ( "SFName",        "name")
  , ( "SFAllocatable", "allocatable")
  , ( "SFFree",        "free")
  , ( "SFSize",        "size")
  ])
$(THH.makeJSONInstance ''StorageField)

-- * Disk access protocol

$(THH.declareLADT ''String "DiskAccessMode"
  [ ( "DiskUserspace",   "userspace")
  , ( "DiskKernelspace", "kernelspace")
  ])
$(THH.makeJSONInstance ''DiskAccessMode)

-- | Local disk status
--
-- Python code depends on:
--   DiskStatusOk < DiskStatusUnknown < DiskStatusFaulty
$(THH.declareILADT "LocalDiskStatus"
  [ ("DiskStatusOk",      1)
  , ("DiskStatusSync",    2)
  , ("DiskStatusUnknown", 3)
  , ("DiskStatusFaulty",  4)
  ])

localDiskStatusName :: LocalDiskStatus -> String
localDiskStatusName DiskStatusFaulty = "faulty"
localDiskStatusName DiskStatusOk = "ok"
localDiskStatusName DiskStatusSync = "syncing"
localDiskStatusName DiskStatusUnknown = "unknown"

-- | Replace disks type.
$(THH.declareLADT ''String "ReplaceDisksMode"
  [ -- Replace disks on primary
    ("ReplaceOnPrimary",    "replace_on_primary")
    -- Replace disks on secondary
  , ("ReplaceOnSecondary",  "replace_on_secondary")
    -- Change secondary node
  , ("ReplaceNewSecondary", "replace_new_secondary")
  , ("ReplaceAuto",         "replace_auto")
  ])
$(THH.makeJSONInstance ''ReplaceDisksMode)

-- | Basic timeouts for RPC calls.
$(THH.declareILADT "RpcTimeout"
  [ ("Urgent",    60)       -- 1 minute
  , ("Fast",      5 * 60)   -- 5 minutes
  , ("Normal",    15 * 60)  -- 15 minutes
  , ("Slow",      3600)     -- 1 hour
  , ("FourHours", 4 * 3600) -- 4 hours
  , ("OneDay",    86400)    -- 1 day
  ])

-- | Hotplug action.

$(THH.declareLADT ''String "HotplugAction"
  [ ("HAAdd", "hotadd")
  , ("HARemove",  "hotremove")
  , ("HAMod",     "hotmod")
  ])
$(THH.makeJSONInstance ''HotplugAction)

-- | Hotplug Device Target.

$(THH.declareLADT ''String "HotplugTarget"
  [ ("HTDisk", "disk")
  , ("HTNic",  "nic")
  ])
$(THH.makeJSONInstance ''HotplugTarget)

-- | SSH key type.

$(THH.declareLADT ''String "SshKeyType"
  [ ("RSA", "rsa")
  , ("DSA", "dsa")
  , ("ECDSA", "ecdsa")
  ])
$(THH.makeJSONInstance ''SshKeyType)

-- * Private type and instances

redacted :: String
redacted = "<redacted>"

-- | A container for values that should be happy to be manipulated yet
-- refuses to be shown unless explicitly requested.
newtype Private a = Private { getPrivate :: a }
  deriving (Eq, Ord, Functor)

instance (Show a, JSON.JSON a) => JSON.JSON (Private a) where
  readJSON = liftM Private . JSON.readJSON
  showJSON (Private x) = JSON.showJSON x

-- | "Show" the value of the field.
--
-- It would be better not to implement this at all.
-- Alas, Show OpCode requires Show Private.
instance Show a => Show (Private a) where
  show _ = redacted

instance THH.PyValue a => THH.PyValue (Private a) where
  showValue (Private x) = "Private(" ++ THH.showValue x ++ ")"

instance Applicative Private where
  pure = Private
  Private f <*> Private x = Private (f x)

instance Monad Private where
  (Private x) >>= f = f x
  return = Private

showPrivateJSObject :: (JSON.JSON a) =>
                       [(String, a)] -> JSON.JSObject (Private JSON.JSValue)
showPrivateJSObject value = JSON.toJSObject $ map f value
  where f (k, v) = (k, Private $ JSON.showJSON v)

-- * Secret type and instances

-- | A container for values that behaves like Private, but doesn't leak the
-- value through showJSON
newtype Secret a = Secret { getSecret :: a }
  deriving (Eq, Ord, Functor)

instance (Show a, JSON.JSON a) => JSON.JSON (Secret a) where
  readJSON = liftM Secret . JSON.readJSON
  showJSON = const . JSON.JSString $ JSON.toJSString redacted

instance Show a => Show (Secret a) where
  show _ = redacted

instance THH.PyValue a => THH.PyValue (Secret a) where
  showValue (Secret x) = "Secret(" ++ THH.showValue x ++ ")"

instance Applicative Secret where
  pure = Secret
  Secret f <*> Secret x = Secret (f x)

instance Monad Secret where
  (Secret x) >>= f = f x
  return = Secret

-- | We return "\<redacted\>" here to satisfy the idempotence of serialization
-- and deserialization, although this will impact the meaningfulness of secret
-- parameters within configuration tests.
showSecretJSObject :: (JSON.JSON a) =>
                       [(String, a)] -> JSON.JSObject (Secret JSON.JSValue)
showSecretJSObject value = JSON.toJSObject $ map f value
  where f (k, _) = (k, Secret $ JSON.showJSON redacted)

revealValInJSObject :: JSON.JSObject (Secret JSON.JSValue)
                  -> JSON.JSObject (Private JSON.JSValue)
revealValInJSObject object = JSON.toJSObject . map f $ JSON.fromJSObject object
  where f (k, v) = (k, Private $ getSecret v)

-- | The hypervisor parameter type. This is currently a simple map,
-- without type checking on key/value pairs.
type HvParams = Container JSON.JSValue

-- | The OS parameters type. This is, and will remain, a string
-- container, since the keys are dynamically declared by the OSes, and
-- the values are always strings.
type OsParams = Container String
type OsParamsPrivate = Container (Private String)


-- | Class of objects that have timestamps.
class TimeStampObject a where
  cTimeOf :: a -> ClockTime
  mTimeOf :: a -> ClockTime

-- | Class of objects that have an UUID.
class UuidObject a where
  uuidOf :: a -> String

-- | Class of objects that can be forthcoming.
class ForthcomingObject a where
  isForthcoming :: a -> Bool

-- | Class of object that have a serial number.
class SerialNoObject a where
  serialOf :: a -> Int

-- | Class of objects that have tags.
class TagsObject a where
  tagsOf :: a -> Set.Set String