Upgrade notes

This document details the steps needed to upgrade a cluster to newer versions of Ganeti.

As a general rule the node daemons need to be restarted after each software upgrade; if using the provided example init.d script, this means running the following command on all nodes:

/etc/init.d/ganeti restart

2.1 and above

Starting with Ganeti 2.0, upgrades between revisions (e.g. 2.1.0 to 2.1.1) should not need manual intervention. As a safety measure, minor releases (e.g. 2.1.3 to 2.2.0) require the cfgupgrade command for changing the configuration version. Below you find the steps necessary to upgrade between minor releases.

To run commands on all nodes, the distributed shell (dsh) can be used, e.g. dsh -M -F 8 -f /var/lib/ganeti/ssconf_online_nodes gnt-cluster --version.

  1. Ensure no jobs are running (master node only):

    gnt-job list
    
  2. Stop all daemons on all nodes:

    /etc/init.d/ganeti stop
    
  3. Backup old configuration (master node only):

    tar czf /var/lib/ganeti-$(date +%FT%T).tar.gz -C /var/lib ganeti
    
  4. Install new Ganeti version on all nodes

  5. Run cfgupgrade on the master node:

    /usr/lib/ganeti/tools/cfgupgrade --verbose --dry-run
    /usr/lib/ganeti/tools/cfgupgrade --verbose
    

    (cfgupgrade supports a number of parameters, run it with --help for more information)

  6. Restart daemons on all nodes:

    /etc/init.d/ganeti restart
    
  7. Re-distribute configuration (master node only):

    gnt-cluster redist-conf
    
  8. Restart daemons again on all nodes:

    /etc/init.d/ganeti restart
    
  9. Verify cluster (master node only):

    gnt-cluster verify
    

2.0 releases

2.0.3 to 2.0.4

No changes needed except restarting the daemon; but rollback to 2.0.3 might require configuration editing.

If you’re using Xen-HVM instances, please double-check the network configuration (nic_type parameter) as the defaults might have changed: 2.0.4 adds any missing configuration items and depending on the version of the software the cluster has been installed with, some new keys might have been added.

2.0.1 to 2.0.2/2.0.3

Between 2.0.1 and 2.0.2 there have been some changes in the handling of block devices, which can cause some issues. 2.0.3 was then released which adds two new options/commands to fix this issue.

If you use DRBD-type instances and see problems in instance start or activate-disks with messages from DRBD about “lower device too small” or similar, it is recoomended to:

  1. Run gnt-instance activate-disks --ignore-size $instance for each of the affected instances
  2. Then run gnt-cluster repair-disk-sizes which will check that instances have the correct disk sizes

1.2 to 2.0

Prerequisites:

  • Ganeti 1.2.7 is currently installed
  • All instances have been migrated from DRBD 0.7 to DRBD 8.x (i.e. no remote_raid1 disk template)
  • Upgrade to Ganeti 2.0.0~rc2 or later (~rc1 and earlier don’t have the needed upgrade tool)

In the below steps, replace /var/lib with $libdir if Ganeti was not installed with this prefix (e.g. /usr/local/var). Same for /usr/lib.

Execution (all steps are required in the order given):

  1. Make a backup of the current configuration, for safety:

    cp -a /var/lib/ganeti /var/lib/ganeti-1.2.backup
    
  2. Stop all instances:

    gnt-instance stop --all
    
  3. Make sure no DRBD device are in use, the following command should show no active minors:

    gnt-cluster command grep cs: /proc/drbd \| grep -v cs:Unconf
    
  4. Stop the node daemons and rapi daemon on all nodes (note: should be logged in not via the cluster name, but the master node name, as the command below will remove the cluster ip from the master node):

    gnt-cluster command /etc/init.d/ganeti stop
    
  5. Install the new software on all nodes, either from packaging (if available) or from sources; the master daemon will not start but give error messages about wrong configuration file, which is normal

  6. Upgrade the configuration file:

    /usr/lib/ganeti/tools/cfgupgrade12 -v --dry-run
    /usr/lib/ganeti/tools/cfgupgrade12 -v
    
  7. Make sure ganeti-noded is running on all nodes (and start it if not)

  8. Start the master daemon:

    ganeti-masterd
    
  9. Check that a simple node-list works:

    gnt-node list
    
  10. Redistribute updated configuration to all nodes:

    gnt-cluster redist-conf
    gnt-cluster copyfile /var/lib/ganeti/known_hosts
    
  11. Optional: if needed, install RAPI-specific certificates under /var/lib/ganeti/rapi.pem and run:

    gnt-cluster copyfile /var/lib/ganeti/rapi.pem
    
  12. Run a cluster verify, this should show no problems:

    gnt-cluster verify
    
  13. Remove some obsolete files:

    gnt-cluster command rm /var/lib/ganeti/ssconf_node_pass
    gnt-cluster command rm /var/lib/ganeti/ssconf_hypervisor
    
  14. Update the xen pvm (if this was a pvm cluster) setting for 1.2 compatibility:

    gnt-cluster modify -H xen-pvm:root_path=/dev/sda
    
  15. Depending on your setup, you might also want to reset the initrd parameter:

    gnt-cluster modify -H xen-pvm:initrd_path=/boot/initrd-2.6-xenU
    
  16. Reset the instance autobalance setting to default:

    for i in $(gnt-instance list -o name --no-headers); do \
      gnt-instance modify -B auto_balance=default $i; \
    done
    
  17. Optional: start the RAPI demon:

    ganeti-rapi
    
  18. Restart instances:

    gnt-instance start --force-multiple --all
    

At this point, gnt-cluster verify should show no errors and the migration is complete.

1.2 releases

1.2.4 to any other higher 1.2 version

No changes needed. Rollback will usually require manual edit of the configuration file.

1.2.3 to 1.2.4

No changes needed. Note that going back from 1.2.4 to 1.2.3 will require manual edit of the configuration file (since we added some HVM-related new attributes).

1.2.2 to 1.2.3

No changes needed. Note that the drbd7-to-8 upgrade tool does a disk format change for the DRBD metadata, so in theory this might be risky. It is advised to have (good) backups before doing the upgrade.

1.2.1 to 1.2.2

No changes needed.

1.2.0 to 1.2.1

No changes needed. Only some bugfixes and new additions that don’t affect existing clusters.

1.2.0 beta 3 to 1.2.0

No changes needed.

1.2.0 beta 2 to beta 3

No changes needed. A new version of the debian-etch-instance OS (0.3) has been released, but upgrading it is not required.

1.2.0 beta 1 to beta 2

Beta 2 switched the config file format to JSON. Steps to upgrade:

  1. Stop the daemons (/etc/init.d/ganeti stop) on all nodes

  2. Disable the cron job (default is /etc/cron.d/ganeti)

  3. Install the new version

  4. Make a backup copy of the config file

  5. Upgrade the config file using the following command:

    /usr/share/ganeti/cfgupgrade --verbose /var/lib/ganeti/config.data
    
  6. Start the daemons and run gnt-cluster info, gnt-node list and gnt-instance list to check if the upgrade process finished successfully

The OS definition also need to be upgraded. There is a new version of the debian-etch-instance OS (0.2) that goes along with beta 2.