gnt-network - Ganeti network administration
gnt-network {command} [arguments...]
The gnt-network command is used for network definition and administration in the Ganeti system. Each instance NIC can be connected to a network via the network NIC parameter. See gnt-instance(8) for more details.
The hail iallocator hasn't been updated to take networks into account in Ganeti 2.7. The only way to guarantee that it works correctly is having your networks connected to all nodegroups. This will be fixed in a future version.
add
[--network=NETWORK]
[--gateway=GATEWAY]
[--add-reserved-ips=RESERVEDIPS]
[--network6=NETWORK6]
[--gateway6=GATEWAY6]
[--mac-prefix=MACPREFIX]
[--submit]
[--no-conflicts-check]
{network}
Creates a new network with the given name. The network will be unused initially. To connect it to a node group, use gnt-network connect. --network option is mandatory. All other are optional.
The --network option allows you to specify the network in a CIDR notation.
The --gateway option allows you to specify the default gateway for this network.
IPv6 semantics can be assigned to the network via the --network6 and --gateway6 options. IP pool is meaningless for IPV6 so those two values can be used for EUI64 generation from a NIC's MAC address.
The --no-conflicts-check option can be used to skip the check for conflicting IP addresses.
Note that a when connecting a network to a node group (see below) you can specify also the NIC mode and link that will be used by instances on that group to physically connect to this network. This allows the system to work even if the parameters (eg. the VLAN number) change between groups.
See ganeti(7) for a description of --submit and other common options.
modify
[--gateway=GATEWAY]
[--add-reserved-ips=RESERVEDIPS]
[--remove-reserved-ips=RESERVEDIPS]
[--network6=NETWORK6]
[--gateway6=GATEWAY6]
[--mac-prefix=MACPREFIX]
[--submit]
{network}
Modifies parameters from the network.
Unable to modify network (IP address range). Create a new network if you want to do so. All other options are documented in the add command above.
See ganeti(7) for a description of --submit and other common options.
remove [--submit] {network}
Deletes the indicated network, which must be not connected to any node group.
See ganeti(7) for a description of --submit and other common options.
list [--no-headers] [--separator=SEPARATOR] [-v]
[-o [+]FIELD,...] [network...]
Lists all existing networks in the cluster. If no group names are given, then all groups are included. Otherwise, only the named groups will be listed.
The --no-headers option will skip the initial header line. The --separator option takes an argument which denotes what will be used between the output fields. Both these options are to help scripting.
The -v option activates verbose mode, which changes the display of special field states (see ganeti(7)).
The -o option takes a comma-separated list of output fields. If the value of the option starts with the character +, the new fields will be added to the default list. This allows to quickly see the default list plus a few other fields, instead of retyping the entire list of fields.
The available fields and their meaning are:
ctimeCreation timestamp
external_reservationsExternal reservations
free_countNumber of available addresses
gatewayIPv4 gateway
gateway6IPv6 gateway
group_cntNumber of nodegroups
group_listList of nodegroups (group name, NIC mode, NIC link)
inst_cntNumber of instances
inst_listList of instances
mac_prefixMAC address prefix
mapActual mapping
mtimeModification timestamp
nameName
networkIPv4 subnet
network6IPv6 subnet
reserved_countNumber of reserved addresses
serial_noNetwork object serial number, incremented on each modification
tagsTags
uuidNetwork UUID
list-fields [field...]
List available fields for networks.
info [network...]
Displays information about a given network.
connect
[--no-conflicts-check]
{network} {mode} {link} [groups...]
Connect a network to given node groups (all if not specified) with the network parameters mode and link. Every network interface will inherit those parameters if assigned in a network.
The --no-conflicts-check option can be used to skip the check for conflicting IP addresses.
disconnect {network} [groups...]
Disconnect a network from given node groups (all if not specified). This is possible only if no instance is using the network.
add-tags [--from file] {networkname} {tag...}
Add tags to the given network. If any of the tags contains invalid characters, the entire operation will abort.
If the --from option is given, the list of tags will be extended with the contents of that file (each line becomes a tag). In this case, there is not need to pass tags on the command line (if you do, both sources will be used). A file name of - will be interpreted as stdin.
list-tags {networkname}
List the tags of the given network.
remove-tags [--from file] {networkname} {tag...}
Remove tags from the given network. If any of the tags are not existing on the network, the entire operation will abort.
If the --from option is given, the list of tags to be removed will be extended with the contents of that file (each line becomes a tag). In this case, there is not need to pass tags on the command line (if you do, tags from both sources will be removed). A file name of - will be interpreted as stdin.
Report bugs to project website or contact the developers using the Ganeti mailing list.
Ganeti overview and specifications: ganeti(7) (general overview), ganeti-os-interface(7) (guest OS definitions), ganeti-extstorage-interface(7) (external storage providers).
Ganeti commands: gnt-cluster(8) (cluster-wide commands), gnt-job(8) (job-related commands), gnt-node(8) (node-related commands), gnt-instance(8) (instance commands), gnt-os(8) (guest OS commands), gnt-storage(8) (storage commands), gnt-group(8) (node group commands), gnt-backup(8) (instance import/export commands), gnt-debug(8) (debug commands).
Ganeti daemons: ganeti-watcher(8) (automatic instance restarter), ganeti-cleaner(8) (job queue cleaner), ganeti-noded(8) (node daemon), ganeti-masterd(8) (master daemon), ganeti-rapi(8) (remote API daemon).
Ganeti htools: htools(1) (generic binary), hbal(1) (cluster balancer), hspace(1) (capacity calculation), hail(1) (IAllocator plugin), hscan(1) (data gatherer from remote clusters), hinfo(1) (cluster information printer), mon-collector(7) (data collectors interface).
Copyright (C) 2006, 2007, 2008, 2009, 2010, 2011, 2012 Google Inc. Permission is granted to copy, distribute and/or modify under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.